eSUN epoxy based standard resin can be used for functional testing and rapid prototype printing. Finished models are required to clean by high-concentration alcohol (>95%) for about 30 seconds.

Features:
• Fast print speed
• High precision.
• High hardness and good wear resistance.
• Good moisture-resistance.

Specifications
• Wavelength (nm) : 395-405
• Density (g/cm³) : 1.08-1.13
• Viscosity (25°, MPa.s) : 170-200
• Hardness (Shore D) : 78-82
• Tensile Strength (MPa) : 46-67
• Elongation at Break (%) : 28-36
• Flexural Strength (MPa) : 46-72